BASELINE HEADBOARD

INSTALLATION INSTRUCTIONS

Sologrande Furniture - Headboard Installation Instructions

This headboard comes with 2 support legs and a French cleat hanging system.

The French cleat hanging system is comprised of the 2 small wooden parts cut at 45 degrees.

 

HEADBOARD OUTER FRAME

This headboard has an outer frame instead of a full wooden back board for ease of transport and weight savings. The legs and/or the French cleat need to be attached to the outer frame.

THE 2 SUPPORT LEGS

Most beds are 60cm in height. For DOUBLE / QUEEN / KING size, the legs are about 118 cm long and have 2 screw holes to be installed on the bottom and top outer frame of the headboard.

If your chosen size of headboard is SINGLE / THREE QUARTER, the legs are only 76 cm long. These legs have 3 screw holes to be installed onto the bottom outer frame of the headboard.

Both types of legs may also be screwed on the far left side and far right side vertical outer frame of the headboard for further adjustment in height if needed, but this way, the legs may be seen from the lateral.

Headboard Installation using the French Cleat System

FRENCH CLEAT HANGING SYSTEM

The French cleat system is comprised of 2 wooden parts cut at 45 degrees.

One part is installed on the wall, sharp side upwards and away from the wall, at desired height.

The other part is installed on the top horizontal outer frame found on the back of the headboard, sharp side downwards and away from the headboard.